Replaces 1 pad for your SnapPad jack stand pad system. Pad increases the surface area of the jack foot to help prevent sinking and provides added stability. Fits 11-1/2" and 12" round jack foot.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
What you're looking at right there is the SnapPad. This is gonna be for your 11 1/2 to 12 inch diameter foot pads. What sets these apart from some of the others on our site, these just stay on there. Once you have 'em installed, they'll stay there, so it's just one less thing you have to do. I know packing for the trip, sometimes it gets a little packed on the inside, so this is something you just don't have to take up any storage area on the inside of your RV. These will increase the surface area of your foot plate.
All you have to do is just measure the diameter of it for it to, you find the right one on our site. And pretty much, that's just gonna prevent us from sinking into some of the softer ground we may be leveling on. There's not really a whole lot to these. I think they are pretty nice just because we don't have to store them anywhere and they just stay on there. But two other things that make me feel confident about the purchase.
One, it's recycled rubber. So we're using products that are just gonna get thrown in a dump and we utilize them. So that makes me feel good about the purchase. And also, it's made in the US of A, which is awesome. One last thing that we need to do is just show you how to install them.
Does not take a whole lot of time. All you need is some soapy water and possibly a friend to lower the jack. So stick around, we're gonna show you how we did it. It's probably not a bad idea, once you get the whole entire pad doused down, maybe start to get some of the sides of that, kind of wash the grit off. I think the cleaner, the better, just getting a little bit of the bottom of that pad.
So then we'll go underneath, kind of line this up with the base, and then I'll tell my friend to put it down once it's in place. All right, lower it down. And as you can see, the back is going in pretty nicely, but the front isn't. So I'm gonna actually have 'em lift it back up. So as you can see over there, it's going in a little bit quicker, double on this, so I think I might just spray it a little bit. Squirt, squirt, squirt. You should see it kinda pop up once it's done. There you go, look at that and we are good to go and we can lift them up and now they're gonna stay nice and put and then we can move on to the rest. It's just that simple, just a simple thing, so you don't really have to carry some of your pads in some of your storage areas. And that's pretty much it for a look at the SnapPads for your 10-inch round foot jacks. And that's pretty much it for a look at the SnapPads..
Do you have a question about this RV Jack Pad?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.